Why Should I value Log Home Maintenance?
We visit many log homes through the entire year. Something you start to notice is the lack of maintenance on many of these homes. This can be disheartening for some customers when they request a proposal on maintenance and receive a proposal for the restoration of their log home because the prevailing finish was beyond maintainable condition. The truth of the problem is that this could have been avoided if proper maintenance was performed consistently.
The average maintenance cost is about $2,500 – $3,000 bi-annually. Sometimes this price is lower and sometimes it could be higher it just depends how the log home finish and sealants weathered in the last number of years. Some owners may find themselves needing maintenance every year on select hotspots around the home to be able to keep the stain performing to its fullest.
What’s Log Home Maintenance?
Log home maintenance is the entire upkeep on a log shell to make sure there is proper protection from damaging UV radiation, water damage, air infiltration, and insect and rodent intrusion. Maintenance also ensures the log cabin looks just how it did the first day it absolutely was finished.
One part of maintenance that actually helps to give the life of stains and sealants is an annual wash of your log home. This removes any surface contaminants such as for example dust, pollen, bird feces, and insect remains (webs, egg sacs, skeletons, etc.) that may wear the conclusion prematurely. Washing the home is also a good time to find any areas of failed caulking or chinking and provide an overall assessment of the condition of the log home stain to get a concept of what walls or areas need a maintenance coat of stain.
An effective way to assess the condition of a log home finish is to hold back for the building to dry after being washed ремонт на входни метални врати
. Once dry you have to understand what type of log home stain is on your own building. When you have a gas based stain you should be looking at the knots and checks on the walls. These areas will turn blonde when the conclusion is wearing off and this indicates that you should apply anyone to two maintenance coats of stain. Some oil based stains now give you a clear maintenance coat and this is the better path to take however it only works if the stain is not worn to bare wood.
When you have a waterborne latex based stain on your own building you should be looking at the glossiness of the finish. Once the conclusion is dull you need to apply an obvious maintenance coat to these areas.
When caulking or chinking is failed or failing around the building you need to mark these spots out and take away the bad areas of caulking or chinking with a knife or razor. This may allow the region behind the sealant to properly dry out since moisture was probably the reason why the sealant is not staying with the logs. Once dry apply backer rod to the log joint and apply caulk or chink to the region making certain to complement the prevailing caulking or chinking line. This will be achieved before applying the maintenance coat of stain until you have white chinking.